How Do I Upload Data From My Contour Meter to Carelink
Installing and Using the CareLink Uploader
Installing the CareLink™ Uploader
The CareLink uploader allows you to upload the information in your pump or meter to the CareLink website. Before you tin begin to upload your data to CareLink™ software, you volition start need to download and install the CareLink™ Uploader. Once installed, you will not need to repeat this process, unless you are uploading from a new computer.
To install the Uploader:
1. Sign into the CareLink™ website.
two. On the next page, click on the link, "How to Install Uploader."
iii. Click on "Download CareLink Uploader installer" under stride 2.
four. You volition have the choice to run the file or save the file. If y'all choose to run the file, click "Run." If you lot cull to salvage the file, choose a folder y'all volition be able to easily detect, such as Downloads or Desktop.
5. When the file has completed downloading, double click on the file to begin installation.
NOTE: You may need administrative rights on your computer to run the installer.
6. Select the language you would like to use and click "OK."
vii. Select "Adjacent" to continue.
eight. Select "Side by side" again.
nine. Make sure your CareLink USB or meter are not plugged into your computer and select "OK."
10. Select "Finish" when the installation has completed.
Adding Your Devices to the Uploader
The first time yous access the Uploader, yous will need to add together your pump and/or meter. You lot will only have to do this once.
To Add Your Insulin Pump:
1. Plug in the CareLink USB or meter into your computer and make certain your insulin pump is within 6 feet of the device.
ii. Login to the CareLink™ website and click on "Upload Device."
3. The Uploader will open up. On the next screen, click on "+ New Pump" to add together your insulin pump. You lot will only need to do this one time.
4. Select the model of insulin pump you plan to add.
five. Side by side, you volition demand to enter the serial number for your insulin pump. This can be plant in the back of the pump or on the pump's Status Screen. Click Next when you are finished.
6. Check that your pump gear up to exist uploaded and is not:
- Running a temp basal rate
- Alarming
- Bolusing
- Running on a low battery
vii. Click on "Add Pump."
viii. The Uploader will examination the connection between your device and the calculator. Later on testing the connection, you will return to the home screen, where your device will be displayed.
To upload your non-linked meter or to upload but your linked meter data, you will offset need to add together it to the Uploader.
To Add Your Meter:
one. Login to the CareLink™ website and click on "Upload Device."
2. The Uploader volition open. On the next screen, click on "+ New Meter" to add the device you want to upload. Yous will but need to do this once for each device.
iii. Select the meter brand of the meter you wish to upload.
4. Select the brand and model of your meter.
5. Follow the instructions on the screen to brand certain your meter is ready, then click on "+ Add Meter."
6. The Uploader volition test the connection between your device and the computer. Subsequently testing the connectedness, yous will return to the home screen, where your device will be displayed.
Uploading Your Device Data to CareLink™ Software
Once yous accept added your devices to the Uploader, you tin can begin to upload your data to the CareLink™ website.
To Upload Your Devices:
i. Plug in the CareLink USB or meter into your reckoner and make sure your insulin pump is within 6 feet of the device.
2. Login to the CareLink™ website and click on "Upload Device."
3. Select the device you would like to upload. Previously updated devices will already be listed.
4. Make sure your device is prepare to upload and click on "Upload Now."
five. Your device will begin the upload process.
gilliardcongavoke41.blogspot.com
Source: https://www.medtronicdiabetes.com/customer-support/carelink-software-support/installing-and-uploading
0 Response to "How Do I Upload Data From My Contour Meter to Carelink"
Postar um comentário